Calculating stair stringers is a crucial step in building a safe and sturdy staircase. Stair stringers are the structural supports that hold the treads and risers in place, and they must be accurately measured and cut to ensure the stairs are level and stable. In this article, we will explore the steps involved in calculating stair stringers for both indoor and outdoor staircases.

Whether you are a DIY enthusiast or a professional contractor, understanding how to calculate stair stringers is essential to building a staircase that meets safety standards. There are several factors to consider when measuring stair stringers, including the height and width of each step, the angle of the stairs, and the overall length of the staircase. By following the correct formula and using the right tools, you can ensure that your stair stringers are cut to the correct size and angle, resulting in a safe and stable staircase.

Understanding Stair Stringers

Stair stringers are the backbone of any staircase. They are the structural supports that hold the treads and risers in place. Understanding stair stringers is crucial if you want to build a safe and sturdy staircase.

Stair stringers come in different shapes and sizes, depending on the design of the staircase. They can be made of different materials such as wood, metal, or concrete. The most common type of stair stringer is the sawtooth stringer, which is made of a series of triangular shapes.

When calculating stair stringers, there are a few key measurements to consider. The rise is the vertical distance between each step, while the run is the horizontal distance between each step. The total rise is the height of the staircase from the floor to the landing. The total run is the distance from the front of the first step to the back of the last step.

To determine the number of stair stringers needed, you must first calculate the maximum allowable span between each stringer. This is determined by the type of material used for the stringer, the spacing between the stringers, and the weight capacity required for the staircase. Once you have calculated the maximum allowable span, you can then determine the number of stringers needed for your staircase.

In summary, understanding stair stringers is essential for building a safe and sturdy staircase. When calculating stair stringers, it is essential to consider the rise, run, total rise, total run, and maximum allowable span. With the right measurements and materials, you can build a staircase that will last for years to come.

Materials and Tools Required

Before calculating stair stringers, it is important to have the necessary materials and tools on hand. Here are the materials and tools required to calculate stair stringers:

Materials

• 
  
• Measuring tape
• 
  
• Pencil and paper
• 
  
• Framing square
• 
  
• Stair calculator (optional)
• 
  
• Lumber (2x12s)
• 
  

Tools

• 
  
• Circular saw
• 
  
• Jigsaw or handsaw
• 
  
• Hammer
• 
  
• Nails or screws
• 
  
• Level
• 
  
• Safety glasses and gloves
• 
  

Measuring tape is essential for measuring the length and height of the stairs. A pencil and paper are also necessary for recording measurements and calculations. A framing square is a useful tool for ensuring accuracy when marking and cutting the stringers. A stair calculator can be helpful for calculating rise and run, but it is not required.

Lumber is needed to make the stringers. The most common size for stair stringers is 2x12s. It is important to use pressure-treated lumber for outdoor stairs to prevent rot and decay.

A circular saw is needed to cut the stringers to length. A jigsaw or handsaw can be used to make the cuts for the treads and risers. A hammer and nails or screws are used to attach the stringers, treads, and risers together. A level is necessary to ensure the stairs are level and safe. Safety glasses and gloves should be worn when using power tools.

Having the necessary materials and tools on hand will make calculating stair stringers easier and more efficient.

Calculating the Total Rise

Calculating the total rise is an essential step in determining the length of stair stringers. The total rise is the vertical distance between the finished floor level at the top of the stair and the finished floor level at the bottom of the stair.

To calculate the total rise, measure the vertical distance between the finished floor level at the top of the stair and the finished floor level at the bottom of the stair. This measurement will provide the total rise in inches.

It is important to note that the total rise measurement should not include the thickness of the finished floor or the subfloor. This measurement should only include the vertical distance between the two finished floor levels.

Once the total rise is determined, it can be used to calculate the number of risers required for the stairs. The number of risers is calculated by dividing the total rise by the desired height of each riser. The International Building Code (IBC) recommends a maximum riser height of 7 ¾ inches and a minimum riser height of 4 inches.

In summary, calculating the total rise is a crucial step in determining the length of stair stringers. To calculate the total rise, measure the vertical distance between the finished floor level at the top of the stair and the finished floor level at the bottom of the stair. This measurement should not include the thickness of the finished floor or the subfloor. Once the total rise is determined, it can be used to calculate the number of risers required for the stairs.

Determining the Total Run

To calculate the total run of a staircase, measure the horizontal distance from the face of the top riser to the face of the bottom riser. This measurement should be taken along the slope of the stairs, or the diagonal distance between the two points.

It's important to note that the total run is not the same as the number of treads on the staircase. The total run is the actual distance that the staircase covers from top to bottom, while the number of treads is simply the number of steps that make up the staircase.

Once you have measured the total run, you can use this measurement to calculate the length of the stringers needed for the staircase. The stringers are the structural members that support the treads and risers of the staircase.

To calculate the length of the stringers, you can use an online stair calculator tool such as the one found at myCarpentry.com. This tool allows you to enter the total rise and total run of the staircase, as well as other important measurements such as the tread depth and riser height.

Alternatively, you can use a mathematical formula to calculate the length of the stringers. The formula is:

Total Run = (Number of Treads - 1) x Tread Depth

In this formula, the number of treads is the total number of steps in the staircase, minus one. This is because the top tread is connected directly to the upper floor, and the bottom tread is connected directly to the lower floor. The tread depth is the horizontal distance between the front edge of one tread and the front edge of the next tread.

By using either an online calculator or a mathematical formula, you can determine the total run of your staircase and calculate the length of the stringers needed to support it.

Figuring Out the Number of Steps

Calculating the number of steps is an essential part of figuring out the stair stringer. The number of steps depends on the height of the stairs, which is the total rise, and the height of each step, which is the rise per step.

To calculate the number of steps, divide the total rise by the rise per step. For example, if the total rise is 96 inches and the rise per step is 7 inches, then the number of steps is 13.7, which rounds up to 14.

It's important to note that the rise per step should be between 4 and 7 inches, with a maximum variation of 3/8 inch between the smallest and largest rise. This ensures that the stairs are comfortable and safe to use.

To double-check the number of steps, it's recommended to divide the total rise by the number of steps and compare it to the rise per step. If there's a significant difference, adjust the rise per step accordingly and recalculate the number of steps.

Overall, calculating the number of steps is a crucial step in determining the stair stringer and ensuring that the stairs are safe and comfortable to use.

Here's a table summarizing the steps to calculate the number of steps:

Calculating the Tread Depth

The tread depth is the horizontal distance between the front edge of one step and the front edge of the next step. It is an important part of calculating stair stringers because it affects the overall run of the stairs.

To calculate the tread depth, you need to know the desired rise and run of the stairs. The rise is the vertical distance between the top of one step and the top of the next step, while the run is the horizontal distance between the front edge of the first step and the back edge of the last step.

Once you have determined the rise and run, you can use a stair calculator, such as the one found on myCarpentry, to calculate the tread depth. Simply enter the rise and run into the calculator, and it will provide you with the necessary tread depth.

It is important to note that the tread depth must be consistent throughout the entire staircase. This is not only important for safety reasons, but also for aesthetic reasons. Inconsistencies in tread depth can make the stairs look unprofessional and poorly constructed.

If you are unsure of how to calculate the tread depth or any other aspect of stair stringers, it is recommended that you consult a professional contractor or carpenter. They will be able to provide you with the necessary expertise and guidance to ensure that your stairs are safe and structurally sound.

Determining the Riser Height

To calculate stair stringers, it is essential to determine the riser height. The riser height is the vertical distance between the top of one step and the top of the next step. The riser height must be consistent throughout the entire staircase to ensure user safety.

The International Residential Code (IRC) mandates that riser heights must be between 4 and 7.75 inches. However, it is recommended to keep the riser height between 7 and 7.5 inches for optimal comfort and safety.

To determine the riser height, divide the total height of the staircase by the number of steps. For example, if the total height of the staircase is 96 inches, and you want to have 12 steps, the riser height would be 8 inches.

It is important to note that the riser height should be consistent throughout the entire staircase. Any variation in riser height can cause a tripping hazard and make the staircase difficult to use.

In conclusion, determining the riser height is an essential step in calculating stair stringers. It is recommended to keep the riser height between 7 and 7.5 inches for optimal comfort and safety.

Laying Out the Stringer

After calculating the rise and run of the stairs, the next step is to lay out the stringer. The stringer is the main framing member that runs diagonally and supports the stairs.

To lay out the stringer, you will need to measure and mark the location of each tread and riser on the stringer. This can be done using a framing square, which is a tool that has two arms at a 90-degree angle.

First, mark the top and bottom of the stringer. Then, measure and mark the height of each riser and the length of each tread. Use the framing square to ensure that the marks are square to the stringer.

Once all the marks have been made, connect them using a straight edge to create the cut lines for the stringer. Cut along these lines using a circular saw or handsaw.

It is important to note that the stringer should be made from a sturdy material, such as pressure-treated lumber or engineered wood. The size and spacing of the stringers will depend on the width and height of the stairs, as well as the weight capacity required.

Overall, laying out the stringer is a crucial step in building a safe and sturdy set of stairs. By following the proper measurements and using the appropriate materials, you can ensure that your stairs will be both functional and durable.

Cutting the Stringers

Once the stair stringers have been calculated, it's time to cut them. Cutting the stringers accurately is crucial for the safety and stability of the stairs.

To cut the stringers, you will need a circular saw, a jigsaw, a framing square, and a measuring tape. It's also recommended to wear protective gear, such as safety glasses and gloves.

First, mark the top and bottom of the stringer according to the rise and run measurements. Then, use the framing square to draw a line between the marks. This will be the cutting line for the stringer.

Next, use the circular saw to cut along the line. Be sure to follow the line precisely to ensure the stringer is cut accurately.

After the cut is made, use the jigsaw to cut out the notches for the treads and risers. Be sure to follow the measurements precisely to ensure the notches are cut accurately.

Finally, test fit the stringer to ensure it fits correctly. If adjustments need to be made, use the jigsaw to make any necessary cuts.

Overall, cutting stair stringers requires precision and accuracy. By following the proper measurements and using the appropriate tools, the stringers can be cut safely and accurately.

Installing the Stringers

Once the stair stringers have been cut, the next step is to install them. This process involves attaching the stringers to the deck or landing frame, and then installing the treads and risers.

To attach the stringers, use galvanized or stainless steel screws to secure the top of the stringer to the deck or landing frame. It is important to use screws rather than nails, as screws provide more holding power and are less likely to work loose over time.

Next, install the treads and risers. Treads are the horizontal boards that form the steps, while risers are the vertical boards that form the face of each step. The treads and risers can be attached using either glue or screws, but screws are recommended for added durability.

When installing the treads and risers, it is important to ensure that they are level and flush with the stringers. Use a level to check the horizontal alignment of the treads, and make any necessary adjustments before securing them in place.

Finally, install the handrail and balusters to complete the stair installation. The handrail provides support and safety, while the balusters prevent falls and add visual appeal to the stairs.

By following these steps, homeowners can install stair stringers with confidence and ensure a safe and sturdy staircase for years to come.

Finishing Touches and Safety Considerations

After calculating the stair stringers and cutting them to size, there are a few finishing touches and safety considerations to keep in mind. These final steps are crucial to ensure the safety and longevity of your stairs.

Adding Treads and Risers

Once the stringers are installed, it's time to add the treads and risers. Treads are the horizontal part of the stairs that you step on, while risers are the vertical parts that connect the treads. It's important to choose quality materials for the treads and risers and to secure them properly to the stringers. This will ensure that the stairs are stable and safe to use.

Finishing the Stairs

After the treads and risers are installed, it's time to finish the stairs. This can include sanding, staining, or painting the wood, or adding a non-slip finish to the treads. A non-slip finish is especially important if the stairs will be used frequently or if they are located outside where they may be exposed to rain or other wet conditions.

Safety Considerations

When building stairs, safety should always be a top priority. Here are a few safety considerations to keep in mind:

• 
  
• Make sure the stairs are well-lit, especially if they are located outside or in a dimly lit area.
• 
  
• Install handrails on both sides of the stairs to provide support and stability.
• 
  
• Make sure the stairs are wide enough to accommodate foot traffic.
• 
  
• Check the stairs regularly for signs of wear and tear, and repair any damage promptly.
• 
  

By following these finishing touches and safety considerations, you can ensure that your stairs are not only functional but also safe and long-lasting.

Frequently Asked Questions

What is the formula for calculating the rise and run of stairs?

The formula for calculating the rise and run of stairs is widely used by builders and DIY enthusiasts. The rise refers to the vertical height of each step, while the run refers to the horizontal distance between each step. The formula for calculating the rise and run of stairs is:

• 
  
• Rise = Total Height / Number of Steps
• 
  
• Run = Total Run / Number of Steps
• 
  

How do you determine the appropriate size for stair stringers?

To determine the appropriate size for stair stringers, you need to consider the total rise and total run of the stairs. The total rise is the vertical distance from the bottom of the first step to the top of the last step, while the total run is the horizontal distance from the front of the first step to the back of the last step. Once you have these measurements, you can use a stair Calculator City or a formula to determine the size of the stair stringers needed.

What are the standard dimensions for stair rise and run?

The standard dimensions for stair rise and run are set by building codes and regulations. In the United States, the International Residential Code (IRC) specifies that the maximum rise for any step should be 7 3/4 inches and the minimum run should be 10 inches. However, some states and municipalities may have their own building codes, so it's important to check with your local building department before building stairs.

How many steps are needed for a given stair height?

The number of steps needed for a given stair height is determined by dividing the total height by the desired step height. For example, if the total height of the stairs is 96 inches and the desired step height is 7 inches, then the number of steps needed would be 13.71. In this case, you would round up to 14 steps.

What size lumber is typically used for constructing stair stringers?

The size of lumber typically used for constructing stair stringers is 2x12 or 2x14. These boards are strong enough to support the weight of people walking up and down the stairs. However, the exact size of the lumber needed will depend on the total rise and run of the stairs, as well as the spacing between the stringers.

How do you calculate stair stringers for stairs with a landing?

To calculate stair stringers for stairs with a landing, you need to measure the total rise and run of each section of the stairs separately. Then, you can use a stair calculator or a formula to determine the size of the stringers needed for each section. Finally, you can add up the number of stringers needed for each section to determine the total number of stringers needed for the entire staircase.